CSMA280 + (4) Control 25-1 White + (2) CSR-V White
JBL
CSMA280 + (4) Control 25-1 White + (2) CSR-V White
CSMA280 + (4) Control 25-1 White + (2) CSR-V White
2 x 80W Commercial Mixer Amp, 4 White 70V Wall Speakers, 2 Wall Volume Controls
Features
- CSMA280 mixer amp with 8 inputs and two 80W output channels for two zones
- Direct 70V/100V outputs power long speaker runs without a separate transformer
- Four white Control 25-1 speakers with 5.25" woofers and 100° x 100° coverage
- Two white CSR-V wall controls connect over Ethernet for per-zone volume
- Voice-activated ducking and priority muting put paging over background music
Couldn't load pickup availability
What's Included in the box
- (1) JBL CSMA280 Commercial Mixer Amplifier
- (4) JBL Control 25-1 White Wall-Mount Speakers (2 Pairs)
- (2) JBL CSR-V White Wall Volume Controllers
SKU: SKU: CSMA280+(2) CONTROL 25-1-WH+2) CSR-V-WHT
View full details










Product Description
Four white Control 25-1 two-way speakers, two pairs, cover the zones with 5.25" woven-fiberglass woofers and 0.75" PEI tweeters. A 100° x 100° coverage angle spreads sound evenly across tables and seating, and the multi-tap transformer lets you set each speaker at 30W, 15W, 7.5W, or 3.7W on a 70V line. IP-44 weather protection means the same speakers work indoors or on a covered patio, and InvisiBall hardware hides the mounting point behind the logo badge for a clean install.
Two white CSR-V wall volume controllers connect to the CSMA280's RJ45 ports over standard Ethernet cable, giving staff a wall control for each zone so nobody has to walk back to the rack to turn the bar down. Voice-activated ducking on channels 1 and 5 lowers the music when someone pages, priority muting cuts through for announcements, and sleep mode powers the amp down after about 30 minutes without signal. White finishes on every speaker and controller blend into light walls, and the Control 25-1 enclosures accept paint for a custom match.
Features
Two-Zone Music and Paging
Eight inputs and two 80W output channels let you mix music, microphones, and TV audio, then send it to two separate areas like a dining room and bar.
Simple Long-Run Wiring
Built-in 70V and 100V outputs power distributed speaker lines directly, so you can run cable across large rooms or patios without adding a separate transformer.
Even Coverage From Every Seat
Each Control 25-1 pairs a 5.25" woofer with a 0.75" tweeter and 100° x 100° coverage, keeping music clear for guests seated off to the side.
Volume Control on the Wall
Two white CSR-V controllers connect to the amp's RJ45 ports over Ethernet cable, so staff can adjust each zone's volume without touching the equipment rack.
Built for Busy Venues
IP-44 weather-protected speakers handle covered patios, while voice ducking, priority muting, and a 30-minute sleep mode keep announcements clear and power use down.
Technical Specifications
- Product Type Commercial Mixer Amplifier and Wall Speaker Package
- Package Contents (1) CSMA280 Mixer Amplifier, (4) Control 25-1 White Speakers, (2) CSR-V White Volume Controllers
- Amplifier Output Power 2 x 80W
- Amplifier Channels 8 Inputs, 2 Outputs
- Amplifier Outputs 4 Ohm, 8 Ohm, 70V, 100V
- Amplifier Inputs Euroblock Mic/Line, Dual RCA
- Phantom Power 27V DC
- Amplifier Frequency Response 20 Hz to 20 kHz ±2 dB (4/8 Ohm), 80 Hz to 15 kHz ±2 dB (70V/100V)
- Signal-to-Noise Ratio Greater than 90 dB
- Remote Volume Ports 2 x RJ45 (for CSR-V)
- Paging Features Voice-Activated Ducking (Ch 1 and 5), Priority Muting, Sleep Mode
- AC Input 100-240V AC, 50/60 Hz
- Speaker Type 2-Way 5.25" Indoor/Outdoor Wall-Mount
- Speaker Drivers 5.25" Woven-Fiberglass Woofer, 0.75" PEI Tweeter
- Speaker Power Rating 200W Continuous Program, 100W Pink Noise (400W Peak)
- Speaker Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W; 100V: 30W, 15W, 7.5W; 8 Ohm Thru
- Speaker Frequency Response 85 Hz to 17 kHz (±3 dB)
- Speaker Sensitivity 90 dB (1W/1m)
- Speaker Coverage 100° x 100°
- Speaker Weather Rating IP-44
- Finish White
- Amplifier Dimensions (W x D x H) 17.2 x 11.9 x 1.7 in (436.9 x 302.3 x 43.2 mm)
- Amplifier Weight 11.9 lb (5.4 kg)