CSMA280 + (4) Control 25-1 + (4) 8124 + (2) CSR-V Kit
JBL
CSMA280 + (4) Control 25-1 + (4) 8124 + (2) CSR-V Kit
CSMA280 + (4) Control 25-1 + (4) 8124 + (2) CSR-V Kit
Mixer Amp, 4 Wall Speakers, 4 Ceiling Speakers, 2 Volume Controls for Restaurants, Bars
Features
- CSMA280 mixer amplifier delivers 80W per channel across 2 outputs and 8 inputs
- Runs 4 or 8 ohm speakers or 70V and 100V lines without an external transformer
- Four white Control 25-1 two-way wall speakers with 5.25" woofers and 0.75" tweeters
- Four 8124 4" full-range 70V/100V ceiling speakers for hallways and side rooms
- Two white CSR-V wall controllers set volume for each zone over Ethernet cable
Couldn't load pickup availability
What's Included in the box
- (1) JBL CSMA280 Commercial Mixer Amplifier
- (4) JBL Control 25-1 5.25" Wall-Mount Speakers, White (2 Pairs)
- (4) JBL 8124 4" Ceiling Speakers (2 Pairs)
- (2) JBL CSR-V Wall Volume Controllers, White
SKU: SKU: CSMA280+(2) CONTROL 25-1-WH+CSR-V-WHT 3
View full details










Product Description
Two white CSR-V wall volume controllers plug into the amplifier's two RJ45 remote ports over standard Ethernet cable, so staff can set levels for each zone from the floor instead of walking to the equipment rack. The Control 25-1 speakers carry an IP-44 rating, 70V taps from 3.7W to 30W for room-by-room tuning, and InvisiBall mounting hardware that hides behind the logo badge for a clean install. On the amplifier, euroblock mic/line and RCA inputs take a paging mic, music streamer, and TV audio at the same time, voice-activated ducking lowers the music when someone speaks on channel 1 or 5, and priority muting clears the way for urgent announcements. Separate bass and treble for each output, illuminated level controls, and a sleep mode that powers down after about 30 minutes of silence round out a system built for daily commercial use.
Features
Two-Zone Music and Paging System
One CSMA280 amplifier, four wall speakers, four ceiling speakers, and two wall controllers give your restaurant, bar, or shop music and announcements in two separate areas.
Flexible Wiring Options
Run speakers at 4 or 8 ohms, or connect straight to 70V and 100V distributed lines through the built-in Hi-Z output transformer, with no separate transformer required.
Clear Announcements Over Music
Voice-activated ducking on channels 1 and 5 lowers background music automatically during pages, while priority muting silences the other inputs for urgent announcements.
Wall and Ceiling Coverage
IP-44 rated Control 25-1 speakers cover dining rooms and covered patios, while the 4" 8124 ceiling speakers fill hallways, restrooms, and offices without using wall space.
Volume Control for Each Zone
Two white CSR-V controllers connect to the amplifier RJ45 ports over Ethernet cable, letting staff adjust each zone from the floor instead of the equipment rack.
Technical Specifications
- Product Type Commercial Mixer Amplifier and Speaker Bundle
- Wall Speaker Quantity 4 Control 25-1 (2 Pairs), White
- Ceiling Speaker Quantity 4 JBL 8124 (2 Pairs)
- Volume Controllers (2) CSR-V Wall Volume Controllers, White
- Amplifier Inputs 8 (Euroblock Mic/Line, RCA)
- Amplifier Outputs 2
- Amplifier Power 2 x 80W
- Amplifier Output Options 4 ohm, 8 ohm, 70V, 100V
- Amplifier Frequency Response 20 Hz - 20 kHz ±2 dB (4/8 ohm), 80 Hz - 15 kHz ±2 dB (70V/100V)
- Amplifier Signal-to-Noise Ratio >90 dB
- Phantom Power 27 VDC
- Remote Volume Ports 2 x RJ45
- AC Input 100-240 VAC, 50/60 Hz
- Wall Speaker Drivers 5.25" woven-fiberglass LF, 0.75" PEI HF
- Wall Speaker Power Rating 200W continuous program, 100W continuous pink noise (8 ohms)
- Wall Speaker Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W; 100V: 30W, 15W, 7.5W
- Wall Speaker Frequency Response 85 Hz - 17 kHz (±3 dB), 60 Hz - 20 kHz (±10 dB)
- Wall Speaker Sensitivity 90 dB (1W/1m)
- Wall Speaker Coverage 100° x 100°
- Wall Speaker Environmental Rating IP-44
- Wall Speaker Enclosure High-impact polystyrene (HIPS)
- Ceiling Speaker Driver 4" full range
- Ceiling Speaker Power 6W, 70V/100V
- Amplifier Weight 11.9 lb (5.4 kg)
- Amplifier Dimensions (W x D x H) 17.2 x 11.9 x 1.7" (436.9 x 302.3 x 43.2 mm)