VMA1240 + (2) Control 25-1-WH
JBL
VMA1240 + (2) Control 25-1-WH
VMA1240 + (2) Control 25-1-WH
240W 70V Bluetooth Mixer Amp, 5 Inputs, (4) 5.25" White Wall-Mount Speakers for Restaurants, Bars, Retail
Features
- 240W VMA1240 mixer amplifier powers 70V and 100V distributed speaker lines
- Five inputs with Bluetooth and USB stick playback for music from any source
- Voice-activated ducking lowers music automatically during mic announcements
- Four white Control 25-1 two-way speakers with 5.25" woofers and 0.75" tweeters
- IP-44 weatherized cabinets with 30W, 15W, 7.5W, and 3.7W transformer taps
Couldn't load pickup availability
What's Included in the box
- (1) VMA1240 240W 70V Bluetooth Mixer/Amplifier
- (1) Rack Mount Kit
- (4) Control 25-1 5.25" White Wall-Mount Speakers (2 Pairs)
- (4) InvisiBall Mounting Hardware Sets
SKU: SKU: VMA1240+(2) Control 25-1-WH
View full details










Product Description
Two pairs of white Control 25-1 speakers, four in total, spread that sound across the space. Each two-way cabinet pairs a 5.25" woven-fiberglass woofer with a 0.75" PEI tweeter for clear vocals and full background music, and a 100 x 100 degree coverage pattern keeps the sound even for guests seated off to the side. A built-in multi-tap transformer offers 30W, 15W, 7.5W, and 3.7W settings on a 70V line, so you can set each speaker louder near the bar and quieter in a dining nook. IP-44 rated, weatherized enclosures hold up on covered patios and in humid spaces, InvisiBall mounting hardware keeps installs clean, and the white paintable cabinets can be finished to match your walls.
Features
Complete Commercial Sound System
One 240W mixer amp and four matched wall-mount speakers give a restaurant, bar, or shop everything needed for background music and paging in a single kit.
Stream, Plug In, or Page
Five inputs cover Bluetooth, USB sticks, RCA, 1/4", and Euroblock sources, plus 27V phantom power, so phones, mics, and media players all connect directly to the amp.
Clear Announcements Every Time
Voice-activated ducking drops the music level the moment someone speaks into the mic, so specials, table calls, and closing announcements cut through without manual adjustments.
Set Each Zone's Volume
Multi-tap transformers let each speaker run at 30W, 15W, 7.5W, or 3.7W on a 70V line, keeping sound louder at the bar and softer in quiet seating areas.
Built for Busy, Humid Spaces
IP-44 rated weatherized enclosures, Kapton voice coil formers, and zinc-plated grilles stand up to kitchen humidity, covered patios, and years of daily service.
Technical Specifications
- Product Type 70V Commercial Mixer Amplifier and Wall-Mount Speaker System
- Amplifier Output Power 240W into 4 or 8 Ohms
- Amplifier Outputs 4/8 Ohm, 70V, 100V
- Input Channels 5
- Input Types Euroblock, RCA, 1/4", Bluetooth, USB
- Tone Controls Bass ±14 dB @ 50 Hz, Treble ±14 dB @ 10 kHz per channel
- Phantom Power 27 VDC
- Signal to Noise Ratio >76 dB
- Amplifier THD <0.5%, 20 Hz to 20 kHz
- Amplifier Frequency Response 20 Hz to 20 kHz ±2 dB (4/8 Ohm), 80 Hz to 15 kHz ±3 dB (70V/100V)
- AC Power 100, 120, 220 to 240 VAC, 50/60 Hz
- Speaker Quantity 4 (2 Pairs)
- Speaker LF Driver 5.25" Woven-Fiberglass Cone
- Speaker HF Driver 0.75" PEI Diaphragm
- Speaker Power Rating 200W Continuous Program, 100W Pink Noise (400W Peak)
- Speaker Impedance 8 Ohms (Thru)
- Transformer Taps 70V: 30W, 15W, 7.5W, 3.7W; 100V: 30W, 15W, 7.5W
- Speaker Sensitivity 90 dB, 1W/1m
- Speaker Frequency Response 85 Hz to 17 kHz ±3 dB, 60 Hz to 20 kHz ±10 dB
- Coverage Angle 100° x 100°
- Speaker Enclosure High-Impact Polystyrene, White
- Environmental Rating IP-44
- Amplifier Weight 25.5 lb
- Speaker Weight 7.5 lb each
- Amplifier Dimensions (W x D x H) 17" x 16.3" x 3.5"
- Speaker Dimensions (H x W x D) 9.6" x 7.4" x 5.7"