VRX932LAP + SL-1602 USB

The VRX932LAP powered line array speaker and the StudioLive 16.0.2 USB digital mixer give churches, schools, bands, and clubs a ready-to-run live sound setup that also records every show. You get the speaker, the built-in power, and the console in one order, with nothing extra to buy before the first sound check.

The VRX932LAP packs a 12" neodymium woofer and three 1.5" annular ring compression drivers behind a Constant Curvature waveguide, with a built-in amplifier rated 1750W peak (875W continuous). It reaches 136 dB max SPL across a 100° x 15° pattern from 57Hz to 20kHz, so a single box covers a small venue with clear, even sound. Onboard DSP handles system EQ, and at 52 lb it goes up on a tripod or pole through the dual-angle 36mm pole cup. When the room gets bigger, you can add more VRX932LAP cabinets to build an array of up to five using the integral rigging and array shading selector.

The StudioLive 16.0.2 USB runs the show. Its 16 inputs (8 mono and 4 stereo channels) include 12 XMAX mic preamps, and Fat Channel processing on every channel and bus adds EQ, compression, expansion, and limiting. Four aux buses feed monitor mixes, two 32-bit effects processors add reverb and delay, and a 31-band graphic EQ tunes the main mix to the room. The 18x16 USB 2.0 interface records every channel plus the main mix at up to 48kHz, and scene recall brings back your settings for the next service or gig. Included recording and mixer-control software lets you capture multitracks and adjust the mix from a laptop or tablet.